In-Truss
Cement Dust Control
Manufactured for a cleaner environment
Built into the truss frame of the mobile plant for one load travel.
Key Specs
PLC Control Systems
Vince Hagan is leading the industry with technological innovations like the PLC-based (Programming Logic Controller) control systems on our equipment. This software automates the key operations of your equipment according to the manufacturer-suggested specifications, and takes the guesswork out of concrete production. Customize the programming to your specific production requirements. Once installed in a new plant you can upgrade the system without any additional hardware.
A series of flashes from an onboard light system indicates a fault code to simplify troubleshooting or production inefficiencies. Our service experts can remotely access your equipment for further diagnostics and support.
How Jet-Pulse Technology Works
The technology behind the Hagan Jet-Pulse Dust Collection System is that each row of filter bags is equipped with a solid state sequential timer that energizes a solenoid pilot valve, thus triggering the momentary pulse of compressed air through a blow pipe and down into a row of filter bags. This translates to faster and more objective means of controlling dust at your concrete plant.
As the Jet-Pulse Collection system cleans the environment, it also keeps itself clean and makes it easy for anyone to change our heavy duty, snap-in filter bags.
Our dust control system not only keeps the neighborhood clean and happy, but it also provides the option of recycling the collected dust.
- 1Dust laden air enters the collector through the bottom of the housing section.
- 2
Dust particles are collected on the outside surface of the bags
- 3
Filtered air goes to the clean air chamber and is then exhausted through the outlet
- 4
Periodic pulsing by compressed air removes the accumulated dust from the bags
- 5
Dust falls into a receptacle
- 6
Cleaning frequency and duration are adjustable by solid state timers
Specifications
| Model | Cloth Area (FT²) | No. of Bags | ACFM | Blower HP | A/C Ratio |
|---|---|---|---|---|---|
| VH-1083 JP | 1083 | 99 | 6,500 | 15 | 6:1 |
| Efficiency | 99.9% At 1 Microns |
| Cloth Type | Polyester Felt |
| Cloth Weave | Polyester .065 (Nom) |
| Permeability | 25-45 CFM/FT² @ 0.5 w.g. |
| Bag Weight | 15.5 ± 1 Oz./FT² |
| Construction | Needle punched self supported |
| Bag Length | 84" |
| Bag Diameter | 6" |
Gallery
Plants in Action
We recently manufactured and installed a direct charge LP Series Stationary Concrete Batching Plant in Canada.
We recently manufactured an installed this SHT Series, HCA Auxiliary Silo, and Conveyors for a large volume producer in Ohio.
Vince Hagan recently designed, manufactured, and setup an HS Series batch plant to work on one of the largest infrastructure project in Mexico.
Vince Hagan recently designed, manufactured, and installed an HT Mobile Batch Plant, HCA Silo, and conveyor in Utah.
Vince Hagan innovated, manufactured, and installed a Dual Alley LPM Stationary Concrete Batching Plant with a TM-12 Smart Tilt Mixer for Tec-Crete Transit Mix Corporation in the heart of New York City.
Vince Hagan recently designed, manufactured, and installed an HS Mobile Batch Plant in California.
Request a Quote
Since 1956, Vince Hagan has been the standard for batching plants and industry innovation. Fill out the form below to get a quote started with the most trusted name in the industry.
